_80112128_5.png "FLAVIAspeed E-Bike Tuning - Bosch RIM V2")
_80112128_5.png "Preview: FLAVIAspeed E-Bike Tuning - Bosch RIM V2")
_80112128_5.png "FLAVIAspeed E-Bike Tuning - Bosch RIM V2")
FLAVIAspeed E-Bike Tuning for Bosch Performance Line CX Rim Magnet
The module removes the 25 km/h speed restriction and allows speeds of up to 45 km/h (28 mph).
Compatible with e-bikes equipped with a Bosch Performance Line CX motor and a rim magnet.
This tuning only works with bikes that have a rim magnet. Models without a rim magnet are not supported.
Compatible with Software 17.16.0.
Performance Line CX, Gen 4 (BDU374Y)
Performance Line CX Race Edition, Gen 4 (BDU376Y)
Performance Line CX Cargo Line, Gen 4 (BDU374Y)
Performance Line CX, Gen 5 (BDU384Y)
Performance Line CX-R, Gen 5 (BDU386Y)
Performance Line CX Cargo Line, Gen 5 (BDU384Y)
Display
Purion 200: up to 17.19.3
Purion 400: up to 17.19.3
Intuvia 100: up to 1.1.71
Kiox 300: up to 17.19.3
Kiox 400c: up to 17.19.3
Kiox 500: up to 17.19.3
LED Remote: up to 17.19.3
System Controller: up to 17.19.3
Mini Remote: up to 1.1.20
Power Tube: up to 17.8.0
Connect Modul: up to 15.99.2
ABS: not compatible.
Uses the original rim magnet—no additional speed sensor required.
Easy installation with a wire clamp directly on the motor.
Invisible after installation.
Automatic calibration, ready for immediate use after installation.
Controlled via the bike's control unit —no smartphone required.
Features:
- Can be conveniently turned on/off using the buttons on the control unit.
- Adjustable speed limit between 25–45 km/h. The last setting is saved.
- Tuning is always deactivated when the bike is turned on.
- Option to enable a "softer speed limit behavior" (Dynamic Mode), significantly smoothing out the otherwise abrupt cut-off at the speed limit.
- Installing this module requires removing the motor. Specialized knowledge is necessary. If you lack expertise, have the tuning installed by a specialist.
- The tuning is mounted at a predefined location on the motor. Some bike models may not have enough space, making installation impossible.
- With tuning activated, the speed displayed above 21 km/h and the distance measured will be lower than actual. The odometer will show a reduced mileage after using the tuning.
Not compatible with the following e-bikes (no space available):
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Specifications:
- Housing dimensions: 48mm × 48mm × 6mm
- Cable length: ~140mm
- Weight: 0.021kg
- Power consumption: 0.3W
- Supply voltage: 12VDC.
Legal and safety information / product liability
Operation of the e-bike in public traffic is no longer permitted after installation of the module. The use is only allowed on private or designated test and race tracks.
Damage caused in connection with the operation of the e-bike will not be covered by a private insurance after installation.
Liability, warranty and warranty claims against the dealer or manufacturer of the e-bike expire or are severely limited.
The e-bike is subject to a higher mechanical stress by operating at higher speeds for which it is not designed. This results in additional security risks.
The installation and operation of the module is at your own risk. The manufacturer accepts no liability for damage that is connected with the operation of the device.
Please inform yourself before installing the device about possible further technical and legal consequences.